Associate Professor David Kearney

 

 

1.1    Refereed publications listed chronologically by type (84)

1.1.1    Books

None

 

1.1.2    Refereed chapters (2)

2003

 

Kearney, D. and W. Zhao (2003). A Software Model, Architecture and Environment to Support Web-Based Applications. Chapter 7 in Architectural Issues of Web-Enabled Electronic Business. N. Shi and V. K. Murthy, ISBN: 159140049X Idea Group: pp 256-272.

 

1996

 

D. A. Kearney, G. W. Jackson and A. Nafalski, Integrated Electrical Management and Control, Chapter 6 in Australia's Intelligent House (Eds A. Sidwell and S. Pullen) ISBN 1876189 01 0, Construction Industry Institute Australia, pp36-48, 1996

 

 

1.1.3    Refereed journal articles (10)

 

2007

 

Sriram, V. and  Kearney D (2007). "An Ultra Fast Kolmogrov Phase Screen Generator Suitable for Parallel Implementation." The International Electronic Journal of Optics (Optics Express) 15(21): 13709-13714.

 

Kearney, D. and  Jasiunas  M (2007). "Using Simulated Partial Dynamic Run-Time Reconfiguration to Share Embedded FPGA Compute and Power Resources across a Swarm of Unpiloted Airborne Vehicles." EURASIP Journal on Embedded Systems 2007(2007): 1-12.

 

2003

 

Sharma, A., M. George and D. Kearney (2003). Packing with Boundary Constraints for a Reconfigurable Operating System. Lecture Notes in Computer Science 2823 Springer 2003, ISBN 3-540-20122-X pp. 236 – 245

 

Zhao, W. and D. Kearney (2003). Deriving Architectures of Web-Based Applications. Lecture Notes in Computer Science 2642 Springer 2003, ISBN 3-540-02354-2 pp. 301 – 312

 

2002

 

Itzstein, S., Kearney, D. “Applications of Join Java”. Australian Conferences in Research and Practice in Information Technology Vol 6 ISSN 1445-1336 pp 37-46.

 

Wigley, G., Kearney, D. “The Management of Applications for Reconfigurable Computing using an Operating System”. Australian Conferences in Research and Practice in Information Technology, 6. ISSN 1445-1336 pp 73-81. 

 

Wigley, G., Kearney, D. “Introducing ReConfigME: An Operating System for Reconfigurable Computing.” Lecture Notes in Computer Science 2438 Springer 2002, ISSN 3-540-44108-5 pp 687-697

 

1998

 

D. Delic and D. Kearney, "A Theoretical and Experimental Investigation of a High Permeability Parallel Flux Parametric Oscillator". Studies in Applied Electromagnetics and Mechanics Volume 13 ISSN 90 5199 381 1 IOS Press Amsterdam 1998

 

1995

 

Ö. Göl and D. Kearney, “Stress Analysis in the Cage Induction Motor Under DOL Starting Conditions” Journal of Electrical and Electronics Engineering, Australia - IEAust & IREE Society, vol. 15, pp. 216-217, 1995.

 

1993

 

Ö Göl and D Kearney Stress Analysis in the Cage of an Induction Motor  Journal of Electrical and Electronics Engineering, Australia - IEAust & IREE Society, vol. 13 No 2 pp81 -87 1993

 

        

 

1.1.4    Refereed conference papers (72)

 

2007

 

Nguyen, V., Kearney D and  Gioiosa G(2007). Balancing Performance, Flexibility and Scalablity in a Parallel Computing Platform for Membrane Computing Applications. Eighth Workshop on Membrane Computing (WCM8), Thessaloniki, Greece.

           

Sriram, V. and Kearney D (2007). A FPGA Implementation of Variable Kernel Convolution. Eighth International Conference on Parallel and Distributed Computing Applications and Technologies (PDCAT 2007), Adelaide, Australia.

           

Sriram, V. and Kearney D (2007). A High Throughput Area Time Efficient Pseudo Uniform Random Number Generator Based on the TT800 Algorithm. 2007 International Conference on Field Programmable Logic and Applications (FPL), Amsterdam, Netherlands.

           

Sriram, V. and Kearney D (2007). High Throughput mutli-port MT19937 uniform random number generator. Eighth International Conference on Parallel and Distributed Computing, Applications and Technologies (PDCAT 2007), Adelaide, Australia.

           

Sriram, V. and Kearney  D(2007). Implementing a phase screen generator in hardware. Eighth International Conference on Parallel and Distributed Computing, Applications and Technologies (PDCAT 2007), Adelaide, Australia.

           

Sriram, V. and Kearney D (2007). A Parallel Area Efficient Kolmogorov Phase Screen Generator Suitable for FPGA Implementation. 9th Biennial Conference of the Australian Pattern Recognition Society, South Australia, Australia.

           

Sriram, V. and Kearney D (2007). Research Issues in Using Reconfigurable Computing to Accelerate Infrared Simulation. 9th Biennial Conference of the Australian Pattern Recognition Society, South Australia, Australia.

 

 

2006

 

Kearney, D. and Jasiunas M (2006). "Managing Power Amongst a Group of Networked Embedded FPGAs Using Dynamic Reconfiguration and Task Migration." Dynamically Reconfigurable Architectures, Dagstuhl Seminar Proceedings: 1-9.

           

Sriram, V. and Kearney D (2006). An Area Time Efficient Field Programmable Mersenne Twister Uniform Random Number Generator. 2006 International Conference on Engineering of Reconfigurable Systems and Algorithms, Las Vegas, Nevada, USA.

           

Sriram, V. and Kearney D(2006). A High Speed, Run Time Reconfigurable Image Acquisition Processor fo r a Missile Approach Warning System. The 2006 International Conference on Engineering of Reconfigurable Systems & Algorithms (ERSA'06), Las Vegas, Nevada, USA.

           

Sriram, V. and  Kearney D (2006). A high throughput area time efficient pseudo uniform random number generator based on the TT800 algorithm. 16th International Conference in Field Programmable Logic and Applications, Melia Madrid Princesa, Madrid, Spain.

           

Wigley, G. and Kearney D (2006). Performance Evaluations of ReconfigME. 2006 International Conference on Field Programmable Technology, Bangkok, Thailand.

           

Wigley, G., Kearney D, Jasiunas  M(2006). ReconfigME: A Detailed Implementation of an Operating System for Reconfigurable Computing. 20th IEEE International Parallel & Distributed Processing Symposium (IPDPS 2006), Rhodes Island, Greece.

           

 

2005

 

Wong, S., Jasiunas,M and  Kearney D (2005). Fast 2D Convolution Using Reconfigurable Computing. The Eight International Symposium on Signal Processing and its Applications (ISSPA 05), Sydney, NSW.

           

Wong, S., Jasiunas,M and  Kearney D (2005). Towards a Reconfigurable Tracking System. The 2005 International Conference on Field Programmable Logic and Applications (FLP 2005), Tampere, Finland.

           

 

2004

 

Wong, S. Hopf, J. Kearney, David. "A reconfigurable real-time front end processor for a multi-spectral missile approach warning sensor", in International Conference on Intelligent Sensors, Sensor Networks and Information Processing, Melbourne, Australia, 2004. IEEE press.
 

Itzstein, G. S. and D. Kearney (2004). The Expression of Common Concurrency Patterns in Join Java. Proceedings of the International Conference on Parallel and Distributed Processing Techniques and Applications, PDPTA '04, June 21-24, 2004, Las Vegas, Nevada, USA, Volume 2.  pp 1021-1027 CSREA Press 2004, ISBN 1-892512-24-6

 

Piekarski, W, Smith, R, Wigley, G, Thiele, N, Thomas, B, Kearney, D. Mobile Hand Tracking using FPGAs for Low Powered Augmented Reality. In 8th Int'l Symposium on Wearable Computers, Arlington, VA, Nov 2004.

2003

 

*Hopf, J. and D. Kearney (2003). Specification and Integration of Software and Reconfigurable Hardware Using Hardware Join Java. 2003 IEEE International Conference on Field-Programmable Technology (FPT). Tokyo, IEEE.

 

Kearney, D. and G. Veldman (2003). Evaluation of Network Topologies for a Run Time Re-routable Network on a Programmable Chip. 2003 IEEE International Conference on Field-Programmable Technology (FPT). Tokyo, IEEE.

 

Kearney, D. and G. Veldman (2003). A Concurrent Multi-bank Memory Arbiter for Dynamic IP Cores using Idle Skip Round Robin. 2003 IEEE International Conference on Field-Programmable Technology (FPT). Tokyo, IEEE.

 

Kearney, D., G. Veldman and D. Warren (2003). Abstractions and Primitives Enabling Runtime Resource Allocation for Dynamic IP Cores Using Virtual Platform FPGAs. 2003 IEEE International Conference on Field-Programmable Technology (FPT). Tokyo, IEEE.

 

 

2002

George, M. A., Pink, M., Kearney, D.  A., Wigley, G. B.  Efficient Allocation of FPGA Area to Multiple Users in an Operating System for Reconfigurable Computing”.  Engineering of Reconfigurable Systems and Algorithms (ERSA02).  Las Vegas.  CSREA Press, 2002.

Warren, D., Kearney, D., Wigley, G. “Field Programmable Technology Implementation of Target Recognition Using Geometric Hashing.” Proceedings of the International Conference on Engineering of Reconfigurable Systems and Algorithms-ERSA’02.  June 24-27 2002.  Las Vegas, Nevada, USA.

Wigley, G., Kearney, D. “Research Issues in Operating Systems for Reconfigurable Computing.” Proceedings of the International Conference on Engineering of Reconfigurable Systems and Algorithms-ERSA’02.  June 24-27 2002.  Las Vegas, Nevada, USA. Editors: T. P. Plaks & P. M. Athanas ISBN: 1-892512-96-3

Wigley, G., Hopf, J., Kearney, D. “Implementing an MP3 Decoder on Reconfigurable Hardware”.  Proceedings of the International Conference on Engineering of Reconfigurable Systems and Algorithms-ERSA’02.  June 24-27 2002.  Las Vegas, Nevada, USA. Editors: T. P. Plaks & P. M. Athanas ISBN: 1-892512-96-3

 

Jasiunas, M, Kearney, D, Hopf J, Wigley, G. Fusion for Uninhabited Airborne Vehicles. Field-Programmable Technology, 2002. (FPT). Proceedings. 2002 IEEE International Conference on 2002 pp 348- 351 ISBN: 0-7803-7574-2

Warren, D, Wigley, G, Kearney, D. Hardware Implementation of Geometric Hashing. In Field-Programmable Technology, 2002. (FPT). Proceedings. 2002 IEEE International Conference on 2002 ISBN: 0-7803-7574-20-7803-7574-2
 

Warren, D., Kearney, D., Wigley, G. “Field Programmable Technology Implementation of Target Recognition Using Geometric Hashing.” Proceedings of the International Conference on Engineering of Reconfigurable Systems and Algorithms-ERSA’02.  June 24-27 2002.  Las Vegas, Nevada, USA.

Wigley, G, Hopf, J, Kearney, D. Using Software Techniques when Developing Hardware Applications. In Proc of International Conference on Engineering of Reconfigurabe Systems and Algorithms, June 2002, CSREA Press.

Zhao, W., Kearney, D., Gioiosa, G. “Architectures for Web Bases Applications.” The Fourth Australian Workshop on Software and System Architectures”.  17-18 February 2002.  Sydney, Australia

 

Hopf, J., von Itzstein, G. Stewart. Kearney, D. (2002). Hardware Join Java: A High Level Language For Reconfigurable Hardware Development. In International Conference on Field Programmable Technology, Hong Kong. IEEE Press

 

2001

 

Grant B. Wigley, David A. Kearney The First Real Operating System for Reconfigurable Computers. 6th Australasian Computer Systems Architecture Conference (ACSAC 2001), 29-30 January 2001, Gold Coast, Queensland, Australia.  IEEE Computer Society 2001, ISBN 0-7695-0954-1 pp 130-137

 

*Wigley, G, Kearney, D. The Development of an Operating System for Reconfigurable Computing. In Proc. IEEE Symp. FCCM'01, April 2001, IEEE Press.
 

 

2000

 

S Shoshany and D Kearney, “Software Engineering of Component Adapters”, In Proc. Thirteenth International Conference on Software and Systems Engineering and their Applications ICSSEA 2000 Volume 4 Conservatoir National des Arts et Metiers Paris

 

2000

 

O. Diessel G. Wigley and D Kearney "Operating Systems Support for Dynamically Reconfigurable Architectures" Proc. International Research Centre for Computer Science Dagstuhl Seminar 00261 June 2000

 

J Slay and D Kearney "An Australian Perspective on the Role of the WWW Within Chinese tertiary Computer Science Education” Proc. The Asia Pacific Web Conference  Oct 2000 Xi’an China.

 

1999

 

*Kearney, D. "Theoretical Limits on the Data Dependent Performance of Asynchronous Circuits".  In Proc. 5^th International Symposium on Advanced Research in Asynchronous Circuits and Systems,   IEEE Computer Society Press. 1999.

 

R. Kiefer and D Kearney "A High Bandwidth I/O Architecture for a Reconfigurable Computer"  Proc. 4^th Australasian Computer Architecture Conference Auckland Jan. 1999 Springer ISBN 981-4021-57-1

 

D Kearney and R. Kiefer “Hardware Context Switching in a Signal Processing Application for an FPGA Custom Computer“ Proc. 4^th Australasian Computer Architecture Conference Auckland Jan. 1999 Springer ISBN 981-4021-57-1

 

O. Diessel D Kearney and G. Wigley” A web based multiuser operating system for reconfigurable computing” Proc. 6^th Reconfigurable Architectures Workshop (RAW99) Springer 1999

 

1998

 

*A. Cerone, D.A. Kearney and G.J. Milne, “Integrating the Verification of Timing, Performance and Correctness Properties of Concurrent Systems”, Proceedings of the International Conference on Application of Concurrency to System Design (CSD'98), 1998, IEEE Comp.Soc. Press, 1998.

 

M. Faint and D. Kearney, “Developing an Automated Test Tool for JavaCard™“ In J. Gray J Harvey and A Liu (Eds.) Proceedings of the First Australian Workshop on Construction Software Engineering Tools (AWCSET98) November 1998, Adelaide IEEE

 

1997

Horwood, G., Kearney, D. and Nedic, Z. "Fuzzy Controller using Floating Membership Functions for the Braking of a Long Haul Train".  In Proc. International Knowledge-Based Intelligent Electronic Systems Conference, USA.  1997. IEEE. V 2 pp455-460.

 

Kearney, D. and Bergmann, N. "Bundled Data Asynchronous Multipliers with Data Dependent Computation Times".  In Proc. 3rd International Symposium on Advanced Research in Asynchronous Circuits and Systems,   IEEE Computer Society. 1997. pp186-197.

 

Kearney, D. and Bergmann, N. 1997. "VLSI Design of an Asynchronous Multiplier with Data Dependent Processing Times".  In Proc. 14th Australian Microelectronics Conference,   IEEE Society. 282-287.

 

Kiefer, R.H. and Kearney, D. 1997. “Performance Comparison of Software /FPGA Hardware Partitions for a DSP Application".  In Proc. 14th Australian Microelectronics Conference,   IREE Society. 88-93.

 

Delic, D. and Kearney, D. 1997. “A Theoretical and Experimental Investigation of a High Permeability Parallel Flux Parametric Oscillator".  In Proc. 8th International Symposium on Non-Linear Electromagnetic Systems. Braunschweig (Germany), May 1997

 

Delic, D. and Kearney, D. 1997. “A New I²C Buffer Chip".  In Proc. 14th Australian Microelectronics Conference,   IEEE Society. pp167-170.

 

Hale, B., O'Neill, T., Skinner, J., Oxenham, M., Kearney, D. and Halgamuge, S. 1997. “Summarisation of Track Data via Possibilistic Reasoning".  In Proc. International Workshop on Image Analysis and Fusion, Adelaide.   CSSIP. 347-356.

 

1996

 

D Kearney and R Johnson "A New Undergraduate University Course in Manufacturing Automation and Control of Discrete Event Industrial Systems”Proc. International Conf. On Robotics, Vision and Parallel Processing for Industrial Automation Nov 1996 Ipoh  University of Sains Malaysia.

 

D. A. Kearney, N. W. Bergmann, and R. G. Burford, “Performance Enhancement Techniques for Wavefront Array Filter Structures”, Fourth International Symposium on Signal Processing and its Applications, B. Boachash, N. Harle, and A. M. Zoubir, Eds., Gold Coast, Queensland ed. Brisbane: Queensland University of Technology, 1996, pp. 654-657.

 

R. Johnson and D. Kearney, “Timed Discrete Event Modelling of Dynamic Events in Industrial Power Systems”, vol. 1, Australian Universities Power Engineering Conference AUPEC'96, M. Aldeen and A. Kalam, Eds., Melbourne, Australia ed. Melbourne: The University of Melbourne, 1996, pp. 7-12.

 

R. Johnson and D. Kearney, “A Tutorial on Timed Discrete Event Modelling and its Applications to Automation Systems”, vol. 3, Fourth International Conference on Control, Automation, Robotics and Vision, Singapore ed. Singapore: Nanyang Technological University, 1996, pp. 990-994.

 

D. Kearney and N. Mlilo, “Compilation Scheme for Structure Petri Net Based Software Development of PLC Controlled Discrete Event Systems”, vol. 2, Proceedings of the Fourth International Conference on Control, Automation, Robotics and Vision (ICARCV'96),  Singapore, 1996, pp. 971-975.

 

D. Delic and D. Kearney, “An Intelligent Earth Leakage Residual Current Safety Switch”, vol. 1, Australasian Universities Power Engineering Conference, M. Aldeen and A. Kalam, Eds., Melbourne, Australia ed. Melbourne, Australia: The University of Melbourne, 1996, pp. 89-94.

 

D. Kearney, A. Nafalski, and O. Gol, “Self-Directed Assessment in Electrical Engineering”, vol. 1, Proceedings of Australian Universities Power Engineering Conference AUPEC'96, M. Aldeen and A. Kalam, Eds., Melbourne ed. Melbourne, Australia: The University of Melbourne, 1996, pp. 477-481.

 

1995

 

D. Kearney, “New Course Initiatives in Industrial Control featuring Discrete Event Systems and Fuzzy Logic”, Pacific Region Conference on Electrical Engineering Education, Marysville Australia ed, 1995, pp. 98-102.

 

D. Kearney and N. Bergmann, “Performance Evaluation of Asynchronous Logic Pipelines with Data Dependant Processing Delays”, 2nd Working Conference on Asynchronous Design Methodologies, London ed, 1995, pp. 14-31.

 

D. Kearney and N. Mlilo, “Using Formal Methods to design Fault Finding Code for PLC Controlled Systems”,  Proc.  Electrical Engineering Congress, Adelaide  Adelaide: Institution of Engineers Australia, 1995, pp. 197-202.

 

D. Kearney and C. Tran, “Minimum Jerk Fuzzy Control of a Steel Uncoiler”, Proc.Control'95, IEAust Melbourne ed, 1995, pp. 393-397.

 

C. Piantedosi and D. Kearney, “A Practical Simplified Method for the Calculation of Back Flask Rate of Transmission Lines”, Proc.Electrical Engineering Congress, Adelaide ed: Institution of Engineers Australia, 1995, pp. 157-163.

 

1994

 

D Kearney "Event Driven Logic Applications for DSP in Communication Systems” Proc. 2nd Int. Symposium on DSP for Communication Systems IEEE Adelaide April

1994

 

D. Kearney  C. Tran  and J Rowley "An Industrial Implementation of a Fuzzy Logic Controller". Proc. Aust. Univ. Power Engineering Conf. Adelaide 1994

 

J.M. Smith and D. A. Kearney An Expert System for Selecting Clauses from a Master Electrical Specification" Proc. Aust. Univ. Power Engineering Conf. Adelaide 1994

 

Kearney D and Mlilo N "Identification of Faults in Industrial Sequential Control Systems" Proc. Aust. Univ. Power Engineering Conf. Adelaide 1994

 

Lay G and Kearney D "Optimal Underground Cables Sizing Based on Whole of Life Losses". Proc. Aust. Univ. Power Engineering Conf. Adelaide 1994

 

1993

 

Kearney D. A. and Göl Ö "Solution Methods for Lumped Permeance Induction Machine Models" Proc. Int. Conf. on Electric. Machines  Adelaide Sept 1993

 

1991

 

Kearney D "A Computer Assisted Curriculum Emphasising the Development of Self Evaluation Skill” Proc. Australian Association for Engineering Education 3rd  Conference Adelaide 1991

 

Kearney D. A. and  Piechnick  J.(1991) “A Low Distortion Remote Area Power Supply using a Thyristor Inverter" Inst. of Engineers (Aust) Proc. EECON91 1991 IE(Aust)

Darwin

 

 

1987

Göl, Ö. and Kearney D. "A Hybrid Modelling Approach to Induction Machine Design” Proc. Int. Conf. on Elect. Machines and Drives, IE(Aust), Adelaide 1987

 

1984

 

Kearney, D. "A Low Cost Pneumatic Robot using a Programmable Controller", Proc. Nat. Conf. on Robotics  IE(Aust), Melbourne 1984